S.S.P Padding
For production of self separating pads without the requirement to knife apart
Developed
for the mass production of pads with a maximum thickness of 1/2",
S.S.P. Padding Adhesive, when used in conjunction with Howrex release
paste or grease, will result in a self separating pad. This cuts
hours off the laborious hand process of knifing apart pads between
their bottom boards. Howrex release agent is applied to the bottom
of the base board by fanning out into a step formation prior to
collation. The boards are then inserted, and then S.S.P Adhesive
applied. This has taken 10 years to perfect, because holding bonding
of strong pads and the requirement of self separate are opposite
extremes. The S.S.P process is successfully being utilised by hundreds
of print shops in Europe and has applications wherever padding is
done. S.S.P and Howrex release agent is available in 25 litre or
5 litre containers from Howarine or through our distributor network.
