For production of a glued, self separating set of normal bond or bank paper
Many companies are unaware that it is possible to produce a self separating glued set with bond or bank paper, in a similar manner to that possible with carbonless (N.C.R) paper.
The process works by pre-treating the middles sheets before collation with a chemical agent called Inercote. When dry the sheets are collated together with the two untreated outer sheets (top sheet and bottom sheet), and the whole stack glued up with Superflex Adhesive. When dry the sets will fan apart without the requirement to knife apart by hand. If carbon paper with a selvedge forms part of the set, this should be treated with Speedcote. If a two part bond set is required, the Howrex System should be utilised.
Inercote, Superflex and Speedcote are available directly from Howarine or through our distributor network in either 5 litre or 3 litre containers.
